ChasR
RR Helper
motivation
Posts: 10,197
Club RR Member Number: 170
|
|
Feb 10, 2015 19:58:14 GMT
|
I am selling the boss from an MGB. It will fit MGs made from 1969 to 1974. The horn ring is missing from the rear but this should be a simple fix with some metal/tin to hand  . As a result of this I shall take £17 posted.:  |
| |
|
|
Mike
Part of things
Posts: 352
|
|
Feb 10, 2015 23:30:00 GMT
|
|
don't suppose you know the difference in fitting between earlier and later cars? il take this if it will fit the splines of a later car!
|
| |
|
|
ChasR
RR Helper
motivation
Posts: 10,197
Club RR Member Number: 170
|
|
|
|
It will fit the splines of a later car (I have tried myself as a trial fitment  ), but you will need to chop off the extending bit at the back (basically, cut the inner tube so that it is flush with the outer part if that makes sense). Without this the boss will not sit on enough for the bolt to screw down. If you wished to go a bit further you could add on a cancellation block/pin to work a little better than the ones the later bosses came with (i.e to ensure that the pin does not actually slip by but turn the cancellation ring!). |
| |
|
|
ChasR
RR Helper
motivation
Posts: 10,197
Club RR Member Number: 170
|
|
Mar 12, 2015 19:16:55 GMT
|
Bump for this. Make me an offer . |
| |
|
|
.
), but you will need to chop off the extending bit at the back (basically, cut the inner tube so that it is flush with the outer part if that makes sense). Without this the boss will not sit on enough for the bolt to screw down.