|
|
|
Nov 26, 2014 14:03:08 GMT
|
|
I need to know if anyone knows the size of the drill bit to enlarge the fuel ratio of the honda cbr600 so they work well for the mitsubishi 4g13 1.3 12v 75hp engine?!?!
Many thanks for those answers...
|
| |
|
|
|
|
|
|
|
Afraid I can't help but unless things have changed since I was playing with bikes, drilling is to be avoided at all costs  Hopefully you can swap jets & springs to get the results you're after. I guess a rolling road session would be a good place to start but I'll let somebody else advise on that. Would anybody on the owners club have any suggested settings to get you started? Have fun!  |
| |
|
|
|
|
|
Nov 27, 2014 13:48:27 GMT
|
Afraid I can't help but unless things have changed since I was playing with bikes, drilling is to be avoided at all costs Hopefully you can swap jets & springs to get the results you're after. I guess a rolling road session would be a good place to start but I'll let somebody else advise on that. Would anybody on the owners club have any suggested settings to get you started? Have fun! Many thanks Just found what I need... |
| |
|
|
Hopefully you can swap jets & springs to get the results you're after.