|
|
Sept 8, 2014 12:13:57 GMT
|
Hi,
I have a selection of SD1 series 2 parts I need to let go.
some of the parts I can remember are
a set of vanden plus door cards, all a little worn, but complete a rear parcel shelf with 6x9 cut outs in grey a couple of rear doors in good order, both need paint passenger side rear door window mechanism - new from rimmer bros, still in packaging instrument cluster and switches all working a good 2.6 engine was running great when removed, but has been sat under the workbench for 2 1/2 years now. headlights in good order front indicators lenses brand new water pump 2.6/2.3
head gasket kit complete and unopened for 2.6
probably got a load of other stuff kicking about.
sorry no pictures at the moment, but I aim to start clearing out over the next week or so, I am trying to clear space for down sizing into my garage at home.
I got rid of the car a few years ago, and cant see me having another one anytime soon, and rather than throwing it in a skip figures someone might make some use out of all of it.
All parts will be cheap, and if you want to take to whole lot off my hands it will be greatly appreciated. you would need a hatch back or small van to do this (or a trailer of course)
|
|
|
|
|
|
|
Sept 16, 2014 17:35:57 GMT
|
If anyone's interested let me know, I'm having a sort out later this week and will start with these bits and bobs
|
|
|
|
|
|
Sept 16, 2014 18:08:01 GMT
|
sd1 indicator/wiper stalks?
|
|
|
|
|
|
Sept 16, 2014 19:42:59 GMT
|
sd1 indicator/wiper stalks? Think I sold them a while back, as they were new ones from rimmers, but will check this week.
|
|
|
|
|
|
Sept 16, 2014 23:58:06 GMT
|
Definitely interested in the doors, headlight, indicator lenses, the dashboard bits, and not doubt other stuff - got a Vitesse in need of some work, so not interested in the 2.6- or VDP- specific stuff I'm afraid. Will drop you a PM tomorrow to discuss things. ;-)
|
|
|
|
|
|
Sept 17, 2014 11:37:13 GMT
|
Definitely interested in the doors, headlight, indicator lenses, the dashboard bits, and not doubt other stuff - got a Vitesse in need of some work, so not interested in the 2.6- or VDP- specific stuff I'm afraid. Will drop you a PM tomorrow to discuss things. ;-) Ok. Regards Dave
|
|
|
|
|
|
Sept 18, 2014 7:14:49 GMT
|
I also have a brand new set of lowered and stiffened coil springs to suit vitesse and VDP models, that lowers the car to 1.5 - 2" lower than vitesse height, I fitted them to my car whilst having other work done, but it never made it on the road, the lowering and stiffening was a massive improvement on what it had originally. I was saving these as they were SOOOO expensive, I got them from rimmer brothers and were circa £350 - £400 for the set. front are yellow koni's and the rears I think are Eibach, they combined to make the car sit really well, and the cars side to side wobble was reduced to that of a modern vehicle the fronts are attached to the vitesse struts. I used ranger rover front shocks on the rear, and they offer much better dampening, but not so good for jacking up, as they have excessive travel. I was going to use them on my Volvo drifter project, as they would be perfect with a bit of fettling, but will sell for the right money. after £150 firm plus postage for the coil springsother parts I still have below
|
|
|
|
|
|
Sept 21, 2014 17:24:34 GMT
|
ignition barrel and key £25 posted dashboard switches and a couple fascia's £15 the lot posted indicator and wiper stalk £ new old stock, only used for 6 months £25 posted
|
|
|
|
|
|
Sept 21, 2014 17:35:21 GMT
|
Ignition barrel and key £25 posted dashboard switches and a couple fascia's £15 the lot posted indicator and wiper stalk £ new old stock, only used for 6 months £25 posted instrument clusters both working £35 posted I have a set of headlights working, the rear brackets are a little rusty but still good to use. £30 posted new old stock 2.3/camshaft still in box £30 posted 2.6 head gasket set includes valve seals and exhaust gaskets etc. £20 posted I have a parcel shelf in grey with cut outs for 6x9 speakers in the fixed bit behind the seats £20 - collection only interior door cards in grey with walnut capping (VDP type) dodgy corners but fixable £10 for the 4. - collection only passenger side rear door - needs paint £15 comes complete with glass and regulator passenger side rear door brand new in package window winder and motor mechanism £20 posted If anyone wants the engine without ancillaries £5 - yes £5 just to cover my fuel to the barn, as its takes up room under my workbench - perfectly good engine new cam belt. everything will be in ebay eventually thanks for looking - Dave
|
|
|
|
|
|
Apr 22, 2015 19:25:00 GMT
|
UPDATE.
All of the SD1 parts are getting thrown out in a week or two - basically when ever I get round to organising a skip to be collected , and me fill it with 10 years of collected car parts.
the things to be thrown out include pretty much every SD1 part I have hanging around, various BMW coil springs, doors, the 2.6 engine interior trim etc etc.
I start a anew job which will leave me little to no time to spend on fixing up cars (enough time to enjoy the ones I have though)
I have about 3/4 ton in scrap metal to be recycled, that all needs collecting before I get the skip in. - the scrap is made up of old bits of Unimog, Volvo seats (they are really heavy) old exhausts, loads of car parts, you know the sort of thing.
I should add that the lowering coils for the SD1 were re homed without trouble, and so did the ignition coil.
PM if you want to come down and collect ther bits, or even some bits, I would rather they are used than thrown out.
PM if your interested.
regards Dave
|
|
|
|
mr
Posted a lot
Posts: 1,544
|
|
Apr 24, 2015 10:13:21 GMT
|
does the 2600 have an su carb? if it does and you have it,how much inc postage please
|
|
Got the car from 105 bhp at the crank to 152 at the wheels.nitrous going on next.....if it ain't broke,keep bolting on go faster parts until it is........ www.fordgranadaclubuk.freefo.de
|
|
|
|
Apr 24, 2015 12:54:39 GMT
|
does the 2600 have an su carb? if it does and you have it,how much inc postage please HI no carbs, they were twin HIF44's on the 2.6 as it happens. I not selling or posting anything, I'm just about to dump the lot, so its more about someone coming here and collecting whatever SD1 bits they think might be useful to them.
|
|
|
|