Putting this as parts but no reason it couldn't be put back on the road quite easily its my old track car that I bent a con rod in probably 2 years back now and its stood since. Had plans to drop a v6 in but no time/money spare as sad as I'll be to see it go needs is must.
Pretty sound shell rust wise but very tatty paint now lacquer peal.
Looms been stripped back to bare essentials.
Dash chopped in half,
Half roll cage just .lace in now.
Fully polybushed suspension arms.
Had coilovers.
Mishmoto rad
Bucket seat on a bride rail drivers side stock pass side.
Fiberglass bootlid
Front strut brace upper and lower
Couple of cylinder heads one heavily skimmed for a tad more power.
And a box of all mx5 bits I can find.
Its all I can really think of most likely missed some really need this to go as one as I'm lazy and when I break cars I seem to have half of it left at the finish lol.
price wise as ive not much of a clue but if i get too many low offers i'll brake it as theres a fair bit of money in parts
car is located in DERBYSHIRE
Some pictures
Pretty sound shell rust wise but very tatty paint now lacquer peal.
Looms been stripped back to bare essentials.
Dash chopped in half,
Half roll cage just .lace in now.
Fully polybushed suspension arms.
Had coilovers.
Mishmoto rad
Bucket seat on a bride rail drivers side stock pass side.
Fiberglass bootlid
Front strut brace upper and lower
Couple of cylinder heads one heavily skimmed for a tad more power.
And a box of all mx5 bits I can find.
Its all I can really think of most likely missed some really need this to go as one as I'm lazy and when I break cars I seem to have half of it left at the finish lol.
price wise as ive not much of a clue but if i get too many low offers i'll brake it as theres a fair bit of money in parts
car is located in DERBYSHIRE
Some pictures