Bit of a long Shot I need 1 or ideally 2, ½ drive square couplers for use in Britool torque wrenches. The common length of a coupler is around 40mm as used in some standard ratchets (available cheap and local) but for a torque wrench they need to be around 50mm +.
Has any one got a broken torque wrench that still has the coupler in tact or any links to buy them new as at the moment the cheapest I can find is around £10 for the coupler then at least £8 for the P&P which is a bit expensive for my taste, esp. considering complete units go on ebay for £20-£50.
Example picture.
Has any one got a broken torque wrench that still has the coupler in tact or any links to buy them new as at the moment the cheapest I can find is around £10 for the coupler then at least £8 for the P&P which is a bit expensive for my taste, esp. considering complete units go on ebay for £20-£50.
Example picture.
