hitman
Part of things
Posts: 645
|
|
|
|
|
just wondered if anyone can point me in the direction ov some kind ov paint/sealer to put on bare metal to protect that has gathered surface rust,been doing a project for last 3/4 years an like a numpty ive not sealed/painted a fair bit ov the welding/plating any advice appreciated,thanks andy
|
| |
|
|
carltonx
Part of things
yardie in brum
Posts: 645
|
|
|
|
|
i use krust i think its made buy hammerite its very good
|
| |
Potentially offensive comment deleted. You are welcome to remove this text, but not replace it with more bigotry. If the need to express that opinion is particularly important, please let me know and I'll delete your account for you.
Maximum signature image height: 80 pixels.
|
|
|
|
|
|
|
|
Wire brush what you can off. Then coat in Hydrate 80 from Bilt Hamber.
|
| |
|
|
taurus
Posted a lot
Posts: 1,084
|
|
|
|
|
Hydrate 80 has a good reputation. I use a similar product from Dinitrol - Converust. The point is that on my Viva project there is metal I cleaned off about 18 months ago and left just with the Converust on it. Not primed or anything, and it's still totally rust free.
|
| |
|
|
rodney
Posted a lot
https://www.facebook.com/RD-vehicle-transport-and-recovery-services-525622614268010/
Posts: 1,677
|
|
|
|
|
if your gonna paint it and need a good finish , etch prime it then ideally some 2k primer,.
|
| |
facebook: rodney dean / rd transport  |
|
