Wanted Exhaust Fabricator

Deleted Posts: 0	Wanted Exhaust FabricatorDeleted @Deleted
	Sept 4, 2013 14:46:16 GMT Select Post Deselect Post Link to Post Back to Top
	Looking for 90 degree exhaust bend to go OVER a 70 mm outside diameter pipe someone you ve used in the past ?
	Last Edit: Sept 5, 2013 18:16:38 GMT by Deleted

	Reply Quote

theheap Part of things Posts: 827	Wanted Exhaust Fabricator theheap @theheap
	Sept 6, 2013 11:44:52 GMT Select Post Deselect Post Link to Post Back to Top
	I use a guy in London. Not sure where you are.


	Reply Quote

lemon Part of things Gear head Posts: 114	Wanted Exhaust Fabricator lemon @lemon
	Sept 6, 2013 17:02:37 GMT Select Post Deselect Post Link to Post Back to Top
	Chris Tullet in Aylesbury
	More than it should be, but not as much as it could be

	Reply Quote

bulldog Part of things Posts: 349	Wanted Exhaust Fabricator bulldog @bulldog
	Sept 7, 2013 12:05:26 GMT Select Post Deselect Post Link to Post Back to Top
	There is loads on ebay www.ebay.co.uk/itm/Stainless-Steel-Polished-Elbow-Pipe-Bend-Exhaust-Pipework-Mandrel-Degree-Tubing-/190892519679?pt=UK_DIY_Materials_Plumbing_MJ&var=&hash=item2c7214b0ff Mike


	Reply Quote