|
|
|
|
|
Where to get 3/8 UNF screw-in studs? As opposed to press-in?  |
| |
|
|
|
|
|
|
|
do you mean...bolts?  |
| |
You're like a crazy backyard genius! |
|
|
|
|
|
|
No, Studs, similar to manifold studs. They screw into the hub and the wheel nut goes on top. See below  |
| |
|
|
Copey
Posted a lot
Posts: 2,845
|
|
|
|
|
would it not be easier just to use bolts? would do the same job
|
| |
Last Edit: Jul 3, 2013 12:22:03 GMT by Copey
1990 Ford Sierra Sapphire GLSi with 2.0 Zetec
1985 Ford Capri 3.0 (was a 2.0 Laser originally)
|
|
|
|
|
|
|
Wheel bolts with a 3/8 thread? They need to have the right seating for the wheels But yes that would do Where do i get those from? |
| |
|
|
v8ian
Posted a lot
Posts: 3,766
|
|
|
|
Try this lot, if they don't have anything to suit, you are in deep poop, They might even have studs, If you want specifically want studs, Try Midnight Motors, but they have to be high tensile as they are holding on wheels, www.orbitalfasteners.co.uk/ |
| |
Atmo V8 Power . No slicks , No gas + No bits missing . Doing it in style.
Austin A35van, very different------- but still doing it in style, going to be a funmoble
|
|
Copey
Posted a lot
Posts: 2,845
|
|
|
|
|
|
| |
1990 Ford Sierra Sapphire GLSi with 2.0 Zetec
1985 Ford Capri 3.0 (was a 2.0 Laser originally)
|
|
|
|
|
|
|
Cheers !  |
| |
|
|
|
|
