Revies Question | Retro Rides

aij29 Part of things Posts: 639	Revies Question aij29 @aij29
	Feb 14, 2013 10:56:54 GMT Select Post Deselect Post Link to Post Back to Top
	Hi Guys is there a way to fit mini pcd (101.6?) revolution 4 spokes to a 100mm pcd car, I ve used wobble bolts/nuts in the past but the revies use a shouldered nut so don't think these will work, I think i ve heard about opening up the holes in the wheels slightly does that sound right?? Thanks Adrian


	Reply Quote

MrSpeedy East Midlands www.vintagediesels.co.uk Posts: 4,786	Revies Question MrSpeedy @mrspeedy
	Feb 14, 2013 12:50:00 GMT Select Post Deselect Post Link to Post Back to Top
	If you do any of the methods you've mentioned above then you MUST use a spigot to locate the wheels concentrically on the hub
	1969 Triumph Vitesse WIP retrorides.proboards.com/index.cgi?board=readersrides&action=display&thread=62127 1962 Ford Thames 400E Turbo diesel retrorides.proboards.com/index.cgi?board=readersrides&action=display&thread=62145 1993 Mercedes S124 300TD

	Reply Quote

aij29 Part of things Posts: 639	Revies Question aij29 @aij29
	Feb 14, 2013 12:59:48 GMT Select Post Deselect Post Link to Post Back to Top
	Feb 14, 2013 12:50:00 GMT MrSpeedy said: If you do any of the methods you've mentioned above then you MUST use a spigot to locate the wheels concentrically on the hub Hi Thanks for the reply, I would be using spigot rings but can't use wobbly nuts (ooeer!!) because they need sleeved nuts if i drill the holes slightly oversized would the wheels stay tight?? Cheers Adrian


	Reply Quote

Ryannn Posted a lot Posts: 2,421	Revies Question Ryannn @blackbelt1990
	Feb 14, 2013 18:03:54 GMT Select Post Deselect Post Link to Post Back to Top
	If you use spiggots then they should stay in place
	www.adoequipment.com - New and refurbished parts for BMC classic cars

	Reply Quote