|
|
|
|
|
|
right is it possible to drill steel wheels as i have a set of peugeot steels and want to know if its possible to drill to 4x100 basically making them multi fit. thanks in advance
|
| |
|
|
mylittletony
Posted a lot
Posts: 2,339
Club RR Member Number: 84
|
drilling steel wheelsmylittletony
@mylittletony
Club Retro Rides Member 84
|
|
|
|
Not usually, they have pressed features under the nut/bolt heads to centre the wheel.
Get some 4x100 ones, much easier...
|
| |
|
|
v8ian
Posted a lot
Posts: 3,758
|
|
|
|
|
Nope, Not worth the aggro, as stated they normally have a thickened/raised area around the bolt hole to facilitate a taper seat
|
| |
Atmo V8 Power . No slicks , No gas + No bits missing . Doing it in style.
Austin A35van, very different------- but still doing it in style, going to be a funmoble
|
|
|
|
|
|
|
|
thanks people iv got some other 4x100 steels but they have slicks on just have to swap them , thought id check first.
|
| |
|
|
