purchased from my old place of work, removed fully working and just serviced then put in my garage, greased up and not touched since! Decided I'm not going to get around to using it.
Really nice little modle, very good quality much better than any china lathes etc, I would class it as light industrial.
on 3phaze 415v, so you will need a converter, correct power or VFDs etc.
Comes with extras....
Including the miller attachment
flat bed which sits on the cradle in miller mode (rare)
Set of miller collets
360 degree pitch divider
both 3 and four jaw chucks.
Stand alone Grinder attachment that bolts to it somehow on 240v plug
Sorry for the blurry photos, more can obviously be taken!
In original workshop
in Garage
Heres one on ebay with less items
www.ebay.co.uk/itm/EMCO-Centre-lathe-Model-Maxi-Mat-Super-11-manufactured-in-Austria-by-Maier-Co-/200830100797?pt=UK_Home_Garden_PowerTools_SM&hash=item2ec268253d
I'm asking £3000 ovno
Location: wirral
Heavy to move, I used a Vauxhall van and an engine crane with straps. I can borrow a crane again for use my end but otherwise its upto buyer to come and collect
Thanks
Chris
Really nice little modle, very good quality much better than any china lathes etc, I would class it as light industrial.
on 3phaze 415v, so you will need a converter, correct power or VFDs etc.
Comes with extras....
Including the miller attachment
flat bed which sits on the cradle in miller mode (rare)
Set of miller collets
360 degree pitch divider
both 3 and four jaw chucks.
Stand alone Grinder attachment that bolts to it somehow on 240v plug
Sorry for the blurry photos, more can obviously be taken!
In original workshop
in Garage
Heres one on ebay with less items
www.ebay.co.uk/itm/EMCO-Centre-lathe-Model-Maxi-Mat-Super-11-manufactured-in-Austria-by-Maier-Co-/200830100797?pt=UK_Home_Garden_PowerTools_SM&hash=item2ec268253d
I'm asking £3000 ovno
Location: wirral
Heavy to move, I used a Vauxhall van and an engine crane with straps. I can borrow a crane again for use my end but otherwise its upto buyer to come and collect
Thanks
Chris
