|
|
|
Oct 16, 2012 22:03:12 GMT
|
|
Looking to preserve my ford xr2i and I thought you guys would have the best advice on this forum. You all seem to have cars much older than mine and in better nick. It's been under sealed in the past and I'm looking to build on this by undersealing again and also protecting the panels. Just wanted to know your thoughts on the best product and the best way to do it. Thanks in advance for your help
|
| |
|
|
|
|
|
Oct 16, 2012 22:31:55 GMT
|
|
Dinitrol for the underseal, Bilt-Hamber Dynax S50 for the cavities seems the most-recommended route. Cavity wax is essential - most cars rot from the inside out rather that the bottom up.
|
| |
|
|
rob85
Part of things
Posts: 19
|
|
Oct 17, 2012 11:18:47 GMT
|
|
I've recently used Dinitrol 3125 cavity wax on my Eunos Roadster and it was a pleasure to use.. ended up using 6 tins of the aerosol stuff (£35 delivered) well reccomended!
|
| |
|
|
|
|
|
Oct 17, 2012 12:47:38 GMT
|
Ron where did you get the dinitrol for that price  ? |
| |
|
|
taurus
Posted a lot
Posts: 1,084
|
|
Oct 17, 2012 14:21:29 GMT
|
|
I bought the same Dinitrol spray wax on ebay - Rejel have an ebay section and it's cheaper to buy it via their ebay than from their main website.
The Dinitrol stuff is very very good. Far better than Waxoyl products.
|
| |
|
|
rob85
Part of things
Posts: 19
|
|
Oct 17, 2012 18:14:35 GMT
|
|
as above.. I got mine from Rejel via ebay..
|
| |
|
|
|
|
|
Oct 17, 2012 19:16:52 GMT
|
|
I take it the rejel stuff is the same ? I found 8 cans of cavity wax for £43.99
|
| |
|
|
rob85
Part of things
Posts: 19
|
|
Oct 17, 2012 19:55:41 GMT
|
I take it the rejel stuff is the same ? I found 8 cans of cavity wax for £43.99 Rejel are a supplier of automotive parts, they don't (as far as I know) do their own cavity wax on another note, if you're "doing it right" you may need to drill the odd small hole to get the extention wand into, therefore it may be worthwhile buying a handful of small rubber blanking grommets. I was lucky in that on the Eunos there's some handy factory holes under the sill trims i managed to get access to where I wanted to be |
| |
|
|
|
|
|
Oct 17, 2012 20:50:26 GMT
|
|
Ron I don't suppose you still have the link do you
|
| |
|
|
taurus
Posted a lot
Posts: 1,084
|
|
Oct 17, 2012 21:56:33 GMT
|
|
|
| |
|
|
|
|
|
Oct 18, 2012 10:40:56 GMT
|
|
Thanks mate your a star
|
| |
|
|
?