pork
Posted a lot
Posts: 1,656
|
|
Aug 18, 2012 19:06:14 GMT
|
|
Where can I find one/how does it work?
Sent from my iPad using ProBoards app
|
| |
|
|
|
|
|
Aug 18, 2012 19:30:21 GMT
|
Fit a lambda probe in the downpipe and use the same one as everyone else  |
| |
To get a standard A40 this low, you'd have to dig a hole to put it in |
|
pork
Posted a lot
Posts: 1,656
|
|
Aug 18, 2012 19:40:56 GMT
|
|
No 'speacial' needs being its carbs?
Sent from my iPad using ProBoards app
|
| |
|
|
pork
Posted a lot
Posts: 1,656
|
|
Aug 18, 2012 19:56:27 GMT
|
|
|
| |
|
|
|
|
|
Aug 18, 2012 20:13:40 GMT
|
|
That's perfect.
|
| |
|
|
pork
Posted a lot
Posts: 1,656
|
|
Aug 18, 2012 21:14:45 GMT
|
|
Cool, thanks
Sent from my iPad using ProBoards app
|
| |
|
|
sowen
Club Retro Rides Member
Posts: 2,245
Club RR Member Number: 24
|
|
Aug 19, 2012 19:16:07 GMT
|
|
I've got one of those, great bit of kit, and if you get a few spare exhaust bungs, you can transfer it from one car to another. The only specialist bit of kit you need is a welder to weld the threaded bung into the downpipe and read the instructions.
|
| |
|
|
|
|
|
Aug 20, 2012 10:16:08 GMT
|
I've got one of these also, and must say that this is one of the most important meters I have. It's quite tricky to see what's wrong with an old turbocharged and carb fed motor. One piece of advice if I may, I had the bung welded with the part of the exhaust away from the car. The O2-sensor is actually quite long when fitted to the bung, so check the place where you are going to add it that there is enough clearance. I had to plug the bung and weld another one into another place  |
| |
Renault Laguna Sport Tourer 2.0dCi 178hp -11 // Renault Laguna 2.0T -03 // Renault Clio 1.4 8V -00 // Renault Safrane 2.2 -94 // Renault 11 1.4 T -84 // Renault 11 1.4 T -88 // Renault 11 1.7 TXE -86 // Renault 11 1.4GTL -85 // Renault 5 1.3 TS -79// Renault 11 1.4GTS -84
Link to build thread |
|
pork
Posted a lot
Posts: 1,656
|
|
Aug 20, 2012 11:52:04 GMT
|
|
Cheers for info, very helpfull.
Bike carbs all cleaned now, turbo being delivered this week.
Should really start a build thread to keep a track of things
|
| |
|
|
|
|
|
Aug 20, 2012 16:55:00 GMT
|
|
don't forget though - all "normal" lambda sensors are good for, is telling you that you're either too rich, or too lean.
If you want to actually measure when you're at stoichiometric - you'll need a wideband lambda sensor
|
| |
You're like a crazy backyard genius! |
|
pork
Posted a lot
Posts: 1,656
|
|
Aug 20, 2012 18:19:03 GMT
|
Thanks, it all helps  Sent from my iPad using ProBoards app |
| |
|
|
