tee
Part of things
Posts: 700
|
|
|
|
|
Just brought some wires for my beetle which are 4x100 or 4x108 fitment so my beetle being 4x130 I'm looking to get the wheels re-drilled, been quoted 80 quid does that sound about right?
|
| |
T
|
|
|
|
|
|
|
|
For the local engineering shop here thats 2 hours labour, before the VAT. When you look at it like that...
|
| |
1937 Austin Street Rod - 1941 Wolseley Not Rod - 1956 Humber Hawk - 1957 Daimler Conquest - 1966 Buick LeSabre - 1968 Plymouth Sport Fury - 1968 Ford Galaxie - 1969 Ford Country Squire - 1969 Mercury Marquis - 1970 Morris Minor - 1970 Buick Skylark - 1970 Ford Galaxie - 1971 Ford Galaxie - 1976 Continental Mark IV - 1976 Ford Capri - 1976 Rover V8 - 1994 Ford Fiesta
|
|
|
|
|
|
|
|
Oh yeah, your in Notts aren't you... where's doing the drilling out of curiosity?
|
| |
1937 Austin Street Rod - 1941 Wolseley Not Rod - 1956 Humber Hawk - 1957 Daimler Conquest - 1966 Buick LeSabre - 1968 Plymouth Sport Fury - 1968 Ford Galaxie - 1969 Ford Country Squire - 1969 Mercury Marquis - 1970 Morris Minor - 1970 Buick Skylark - 1970 Ford Galaxie - 1971 Ford Galaxie - 1976 Continental Mark IV - 1976 Ford Capri - 1976 Rover V8 - 1994 Ford Fiesta
|
|
bryn
Posted a lot
Posts: 3,913
|
|
|
|
|
Sounds like a reasonable price to me, £20 snoots a corner? Make sure there's enough material left in the centre to accomodate re-drilling though, sounds like a pretty big increase...
As for those bucket seats I mentioned, I'm going over to my lock up on Saturday, so pics then. Sorry for the delay.
|
| |
Volvo, Buggy, Discovery and an old tractor.
|
|
Mr K
Posted a lot
Posts: 2,993
|
|
|
|
|
i was qouted appx £40 to redrill and open the centre bore on a pair of discs, i would say 80 for a set of wheels is fair.
|
| |
|
|
