|
|
|
|
|
Can I drill a hole in the exhaust housing to weld on an external wastegate flange?  |
| |
|
|
froggy
Posted a lot
Posts: 1,099
|
|
|
|
|
if thats t3 i have a t3-t3 adaptor with 38mm take off for ext gate
|
| |
|
|
|
|
|
|
|
if thats t3 I have a t3-t3 adaptor with 38mm take off for ext gate I only have half an inch between the turbo and bulkhead  , so room for an adapter |
| |
|
|
froggy
Posted a lot
Posts: 1,099
|
|
|
|
|
it needs to be heated and then stick welded with the right rod to last although I have migged bosses for bracing onto housings in the past with no issues . as long as you come off at a decent angle it should work fine . have a look at some sch 40 branch tees as they are cast steel so should stick well with the right filler rod
|
| |
Last Edit: Aug 5, 2012 13:06:07 GMT by froggy
|
|
yzn
Part of things
Posts: 76
|
|
|
|
you mean like this:  the owner said its fine it will just act like internal wastegate |
| |
|
|
, so room for an adapter
