I now have a brand new Magnex fitted to my car so I no longer need this. It's just the rear section but could easily be welded/clamped into a standard MK1/MK2 system with a reducer pipe of course. The back box itself has been replaced at some point with a stainless steel 'tiger' box. It has a nice sound, deep low down then raspy higher in the revs. There is a rattle in the back box, sounds like a stone. Doesn't affect the sound when its on the car, can only be heard when shaken by hand. It has a 3rd hanger welded on. The welding on the hangers on the back box aren't pretty but they do the job and are solid.
Looking for £55 but make me an offer if you think that's too high. Collection from Bury St Edmunds, Suffolk. I can take this to FITP but will require a deposit before hand as I've been screwed over with take parts to shows before.
Looking for £55 but make me an offer if you think that's too high. Collection from Bury St Edmunds, Suffolk. I can take this to FITP but will require a deposit before hand as I've been screwed over with take parts to shows before.
