|
|
|
|
|
SHOP NOW CLOSED. SEE LAST PAGE FOR MORE INFO. Thanks everyone for your business.  Right, I don't know if this breaks forum rules, if it does please remove mods! If not I hope I can offer a service to help people achieve what they want without the price tag! I am a design teacher and have access to the software and a vinyl cutter. I've been cutting and making stickers for people without dissapointment for over a couple of years now in many varying designs. Most of the work I do has been for my site - www.lincsdriver.com and for a friends site - www.dodgemsquad.co.uk. Plus many other one off jobs for mates, new designs, reproductions of old designs, and simpy any design you can send me as a picture to be copied. Here are some examples: LINCSDRIVER STICKER SHOPPlus others:    Colour examples are here: note I also have Yellow, Purple and Green now.  As a guide a sticker of around 220mm by 60mm is £4 posted for the first design, then £3 thereafter (the first takes a fair bit of time/effort as you can imagine). The maximum size I can make you is 1000mm x 180mm which is pretty big here is an example of a dodgem squad sticker which is pretty large:  These are top quality vinyl stickers which are cut to precision, they take some getting off - a jet washer will struggle, and as you can see from the picture above windscreen wipers will not remove them either! Thanks for looking, and please feel free to post images of things you'd like to check if they are possible, or pm me for a quote on a design. Remember; I am a full time teacher, therefore jobs can take a little while to turn around but it's worth it for the low prices and quality stickers. :tup: Any questions and please ask. NOTICE: please note, I cannot match 'bulk prices' found on eBay as once cut on a vinyl cutter I do the rest by hand, therefore it's time consuming. This is more a service to replace a stock original sticker now unavailable, or to make custom one offs etc... If you want a bulk buy I'd suggest eBay. Thanks. Thanks Phil. |
| |
Last Edit: Feb 25, 2012 9:13:30 GMT by doninphi
|
|
|
|
|
|
|
|
|
Another example, fresh off the cutter for a 300zx... This is the great thing, this sticker is from Japan and pretty rare, I've replicated it perfectly, he was blown away by it and very happy to stick it on his pride and joy (which had a very tired original!)  and another for a customer for his Honda:  |
| |
|
|
shane
Part of things
Posts: 141
|
|
Aug 13, 2011 13:21:05 GMT
|
Could you do me some of these? Ive tried looking for a bigger pic but couldnt find any as good as this-  What sort of price would I be looking at each at about 8cms? Many thanks,Shane |
| |
Last Edit: Aug 13, 2011 13:24:49 GMT by shane
|
|
|
|
|
Aug 13, 2011 18:31:38 GMT
|
|
What about instrument dial faces? I
|
| |
Ginetta G15 BMW K1100 conversion Sold
Mk1 Mx5 on ITB'S Sold
TVR Chimaera 400 supercharged
MR2 Red Roadster 2ZZ
Bee*R 324 Skyline
95 Cherokee Jeep
|
|
|
|
|
Aug 14, 2011 19:40:57 GMT
|
Could you do me some of these? Ive tried looking for a bigger pic but couldnt find any as good as this- What sort of price would I be looking at each at about 8cms? Many thanks,Shane Yep, price £8 for both inc post, bit of an awkward design as explained: The design depends on how many layers you want, to make it exact that would be a red rocket layer, yellow moon, and silver backing. or it could just be yellow moon, red rocket with recesses cut out of the yellow, so if it were stuck on glass they would appear black. It will not be exact, but very close! Which do you think would be best? Let me know if you want it, and I'll get a mock up done for you to check. Ta. Phil. |
| |
|
|
|
|
|
Aug 14, 2011 19:43:41 GMT
|
What about instrument dial faces? I See no reason why not, you'd need to be careful sticking them on so as not to get bubbles etc... I'd need to know the size of the hole in the middle, and the size of each circle, if they are circular! - if not I'd need a picture of the gauges head on, and an EXACT measurement of something like one of the needles to size it in the software to then make the vinyl fit. I'd also need an idea of what you wanted and the colours, design wise the vinyl cutter struggles to cut thinner than 1.5mm wide lines (makes it impossible to seperate) therefore they might need to be a more chunky style. But I'll give it a go and would love to try! Cheers Phil. |
| |
|
|
|
|
|
Aug 14, 2011 19:44:21 GMT
|
elmotheewokking asked, and tomorrow this will be going into the post for him for £4.  |
| |
|
|
|
|
|
Aug 14, 2011 19:49:04 GMT
|
What about some of these??  |
| |
Last Edit: Aug 14, 2011 19:53:15 GMT by mark0polo
Maximum signature image height: 80px
|
|
|
|
|
Aug 14, 2011 20:01:18 GMT
|
Shane, did a mock up anyways, the vinyl one will look like the top one, your image is below it. I can't do the shadow on the moon as I only have one type of yellow...  |
| |
Last Edit: Aug 14, 2011 20:01:57 GMT by doninphi
|
|
|
|
|
Aug 14, 2011 20:02:17 GMT
|
What about some of these?? Pm sending to you now. |
| |
|
|
|
|
|
|
|
|
|
Bump for any more work before my summer hols end! |
| |
|
|
cianha
Part of things
aka VDubbin
Posts: 923
|
|
|
|
Hi Don, Would you be able do run up a few of these for me? I've a Hi res (200dpi) xcf (GIMP format) but I think can export to another format if you need. For some reason the clear background is appearing as blue… Even better would be if you only printed the black, leaving the white clear, so that this could be used internally (i can flip the image if you need it?)  |
| |
Last Edit: Aug 16, 2011 10:02:45 GMT by cianha
|
|
|
|
|
Aug 16, 2011 10:17:17 GMT
|
Hi Don, Would you be able do run up a few of these for me? I've a Hi res (200dpi) xcf (GIMP format) but I think can export to another format if you need. For some reason the clear background is appearing as blue… Even better would be if you only printed the black, leaving the white clear, so that this could be used internally (i can flip the image if you need it?) I should be able to do that fine but dependant on size you'll loose a bit of definition on the face's smaller details. What size do you want it and how many? Then I can work out a price. |
| |
|
|
cianha
Part of things
aka VDubbin
Posts: 923
|
|
Aug 16, 2011 11:02:37 GMT
|
|
Each badge is about 3" tall by 2¼" (or 75x57mm). The image above (with the set of 4) was to be printed on a 10x3" bumper sticker, but anything up to 4" tall would be fine.
I would be looking for a run of 50.
Cheers!
|
| |
Last Edit: Aug 16, 2011 11:03:39 GMT by cianha
|
|
VND
Posted a lot
Posts: 1,224
|
|
Aug 16, 2011 11:13:35 GMT
|
|
PMd
|
| |
|
|
|
|
|
Aug 16, 2011 15:24:18 GMT
|
How much for "Airbags Are For Pussys" in the font used on the bottom of that ^ pic? In White and about 2 foot long? Cheers |
| |
Remember the days when sex was safe and motorsport was dangerous. Vintage bling always attracts pussy. |
|
|
|
|
Aug 16, 2011 18:22:52 GMT
|
|
All pm's replied to!
Hairy - £8 posted for that size mate, hard to post them buggers! Lol.
Vdubbin - I've pm'd you!
|
| |
Last Edit: Aug 16, 2011 18:23:31 GMT by doninphi
|
|
|
|
|
Aug 17, 2011 19:01:44 GMT
|
|
Arrived today, love it, will whack it on the screen in the next couple of days and throw up a picture.
Cheers!
|
| |
|
|
|
|
|
Aug 18, 2011 14:38:20 GMT
|
Arrived today, love it, will whack it on the screen in the next couple of days and throw up a picture. Cheers! I'm glad, as you now know this method of production is top quality. Glad you're happy mate. |
| |
|
|
fiatandy
Part of things
Fix It Again Tomorrow
Posts: 85
|
|
Aug 19, 2011 17:14:50 GMT
|
|
Pm'd
|
| |
|
|
|
|
