|
|
|
Had the Astravan dinitrolled Not cheap, but probably worth doing something like this if it’s a keeper. The guys I used are based in North Bucks, slackerTHEpinstriper does the same further north.... but they’ll be someone nearer to you in sure Cheers for that 👍 Currently have a new year deal on and look after fellow Retro Rides members
|
|
|
|
|
|
|
|
|
Happy New year customers old and new. Why not take advantage of 10% off a Rustproofing treatment during January. Just drop me a msg and we can get you booked in then recoup your discount on the final bill.
|
|
|
|
|
|
|
Dec 17, 2020 10:43:47 GMT
|
Nothing shouts punk more than a CRASS sticker in a Rover 😂
|
|
|
|
|
|
|
I believe there et35.
Centre bore is just over Vw size, I had them on a Mk2 Caddy van and they have spigot rings on them.
|
|
|
|
|
|
|
Interested. Are you anywhere near Norfolk? No mate I'm in Barnsley but happily package up for a courier if you arrange one
|
|
|
|
|
|
Dec 10, 2020 14:28:19 GMT
|
Make sure your vehicle is well protected this winter.
|
|
|
|
|
|
|
Is that the IAT sensor you've disconnected? I wonder if you actually do have a un-metered air problem caused by a leak in the inlet hose? My logic being that if it runs a bit better wuth the IAT disconnected, perhaps the ECU is acting as if the inlet air is very cold and increasing fuel. This would compensate for the excess air and improve combustion. If it was my car, I'd replace that dodgy inlet hose and re-connect the IAT. If it's no better, then I'd do a leak-off test on the injectors and get an ODB reader on it to check for codes/fuel pressure/fuel trims. Hose is the next thing on the list
|
|
|
|
|
|
|
always fancied slamming a streetwise, will be keeping a eye on this, i believe coilovers from a mg zr will fit...in fact standard mg zr stuff will give the streetwise a big improvment. i lowered my standard 200 on standard zr springs and it was a good 30-40mm drop That's the route I'm going down I think
|
|
|
|
|
|
|
|
Why is there gaffa tape around the inlet hose? Been like it since I got it
|
|
|
|
|
|
|
I removed this sensor last night abd it ran much better
|
|
|
|
|
|
|
|
Washed, arch trims and fog light surrounds put back on ready for MOT tomorrow
|
|
|
|
|
|
|
with new/refurbished ones? No second hand
|
|
|
|
|
|
|
So swapped injectors over yesterday and it's doing exactly the same
|
|
|
|
|
|
|
Decided to change the colour of the hubs after buying the wrong colour to repaint the front hub back plate. Vauxhall pearl colour over a black base.
|
|
|
|
|
|
|
These are cool, if you want to do a Hot Rod version with Pinstriping etc I would be up for a collab ✌️
|
|
|
|
|
|
|
Nov 30, 2020 14:15:16 GMT
|
Extended forks painted with a couple of chrome tubes to cover the extensions. Then slotted them in for a quick mock up
|
|
|
|
|