Right guys putting the feelers out for swap potentially or if anyone has some Interest... I've got some PLS Hockenheim 3 piece splits which are quite rare in 8J with 5 back spacing and 7J 4.5 back spacing x 13", with PCD 4x95.25 or 4x3 3/4" to fit Triumph, Rover, Lotus ect. Was planning on putting them on my mini put I'm running 101.6 pcd so they would fit the Watson frames with mg pcd..... Was going to get them redilled to suit but seeing if anyone was interested maybe in swapping for correct pcd classic mini wheels
Wheels look great bar some little marks pictures on the barrels and could do with with a good polish.
Quite a few of the bolts are loose so would need the seal checked but this was going to be done if I got them redilled
Only came across one mini with these wheels on and have attached it for info
Wheels look great bar some little marks pictures on the barrels and could do with with a good polish.
Quite a few of the bolts are loose so would need the seal checked but this was going to be done if I got them redilled
Only came across one mini with these wheels on and have attached it for info
