Long story short I am about to paint the interior of Woody my 66 C10.
I don't want to take the front and rear screens out as this ha escalated beyond the original scope by a considerable margin already.
A number of members have said to use a power cord behind the rubbers to make sure that paint gets behind them but my rear screen rubber is absolutely rock hard.
Going to try the power cord trick but the chances are the rubber will tear so, before I JFDI does anybody have any further tips?
Appreciate your suggestions.
P.
I don't want to take the front and rear screens out as this ha escalated beyond the original scope by a considerable margin already.
A number of members have said to use a power cord behind the rubbers to make sure that paint gets behind them but my rear screen rubber is absolutely rock hard.
Going to try the power cord trick but the chances are the rubber will tear so, before I JFDI does anybody have any further tips?
Appreciate your suggestions.
P.