|
|
|
|
|
Currently breaking a C20SEH for some parts, given this was a project car engine but now change of plans on powerplant and these parts are now taking up space. I'll be adding parts as i strip them from the engine to this thread. I do have a complete setup to drop a 16V or a 8V into a Manta or RWD application  Intake manifold for C20SEH / NE OHC engine for DCOE carbs or can be machined to fit injectors. Has been notched to clear Opel Manta 1800 mounts. £150 OVNO - would need O rings and some M6 hardware to complete.   C20SEH water pump - was new when fitted, never run. £5 Call 07905 209340 Edited for price reduction |
| |
Last Edit: Nov 14, 2021 14:49:53 GMT by Sf_Manta
|
|
voodoo57
Club Retro Rides Member
That's not 2 metres! come a little...Closer!
Posts: 2,869 
Club RR Member Number: 137
|
|
|
|
|
rwd sump?
|
| |
|
|
|
|
|
|
|
It's the Manta 1800 big wing sump with pickup, correct dipstick and engine mounts that will bolt straight up to a C20XE / SEH / Z20 based engine as they're all on the family 2 block. I was going to remove them from the engine this week but currently having some health issues and been recovering from it. Soon as i'm able to do so, I'll get some pictures. |
| |
|
|
voodoo57
Club Retro Rides Member
That's not 2 metres! come a little...Closer!
Posts: 2,869
Club RR Member Number: 137
|
|
|
|
|
Take it easy
|
| |
|
|
|
|
|
Nov 14, 2021 14:53:34 GMT
|
As previously mentioned
Complete 1800 Big wing sump and engine mounts from Opel Manta - These were on an engine i'd built for a project car but now have become surplus to requirements.
Kit consists of followling parts
> Big wing sump with fasteners - fits C20 and possibly Z20 engines
> Pick up pipe and support bracket + fasteners
> Correct dipstick and tube
> Manta 1800 engine mounts - Fits C20 and possibly Z20 engines
Whole kit goes for £250
Also avaliable - ARP 2000 rod bolts - installed but never run in engine avaliable - SOLD. I'll be putting these up elsewhere for sale so may go soon. |
| |
Last Edit: Nov 29, 2021 12:29:40 GMT by Sf_Manta
|
|
|
|
|
Nov 14, 2021 15:56:43 GMT
|
C20SEH big port head - Bill Bylestine flowed with big valves - made 174bhp on a C20NE engine, skimmed and valves lapped in -- comes with unknown cam and Kent cams Adjustable pully - SOLD  |
| |
Last Edit: Mar 20, 2022 10:35:53 GMT by Sf_Manta
|
|
