BMW E30 318I M52 2.8 engine swap unfinished project
I have owned this car for a few years now and have slowly been carry out mods and the conversion to it but have now run out of time and interest now so its up for sale! the car itself if in reasonable condition I will list out the mods carried out and a run down of what is needed that I know of.
ENGINE
2.8 M52 engine
M20 lightened flywheel and starter motor (new starter at time of fitting)
New alternator
M50 manifold to come with car
ECU remapped and raised rev limiter to 9000rpm
e34 sump pan and oil pickup )
Exhaust manifolds and down pipes by danthe (if you know e30s you know this guy)
Standard e30 325i exhaust system
Pipercross air filter
e36 radiator
universal electric cooling fan
Danthe fan loom - needs wiring in fully
SUSPENSION AND BRAKES
BC racing coil over all round - 51mm struts
Camber adjustable front top mounts
Polybushe throughout suspension setup - front and rear
new wheel bearings on the front (couple of years old done minimal mileage)
various suspension parts replaced over my ownership
325i rear trailing arms
325 front and rear discs
new hand brake cables
braided hoses all round
STEERING
PAS Steering conversion
e36 power steering rack
e34 steering UJS and custom linkage
danthe power steering lines
new steering arms and track rods (couple of years old but again minimal mileage)
TRANSMISSION AND DRIVETRAIN
318 gearbox
318 diff
325 drive shafts
325 propshaft
WHEELS
Borbets As fitted
It has no MOT and has been off the road for some years - year I did end up getting it MOTd I ended up working the entire summer! it is scabby in places on the sills and bottom of the wings and it does need some mechanical work to finish off as i said its an unfinished project and will be sold as one.
I have boxes of spare parts, a boot lid with spolier and set of side skirts that come in blue and a set of alpina reps that have been refurbished which I will include in the sale.
I am OPEN TO OFFERS but not silly ones - '£500 best price and a packet of crisps'
I have owned this car for a few years now and have slowly been carry out mods and the conversion to it but have now run out of time and interest now so its up for sale! the car itself if in reasonable condition I will list out the mods carried out and a run down of what is needed that I know of.
ENGINE
2.8 M52 engine
M20 lightened flywheel and starter motor (new starter at time of fitting)
New alternator
M50 manifold to come with car
ECU remapped and raised rev limiter to 9000rpm
e34 sump pan and oil pickup )
Exhaust manifolds and down pipes by danthe (if you know e30s you know this guy)
Standard e30 325i exhaust system
Pipercross air filter
e36 radiator
universal electric cooling fan
Danthe fan loom - needs wiring in fully
SUSPENSION AND BRAKES
BC racing coil over all round - 51mm struts
Camber adjustable front top mounts
Polybushe throughout suspension setup - front and rear
new wheel bearings on the front (couple of years old done minimal mileage)
various suspension parts replaced over my ownership
325i rear trailing arms
325 front and rear discs
new hand brake cables
braided hoses all round
STEERING
PAS Steering conversion
e36 power steering rack
e34 steering UJS and custom linkage
danthe power steering lines
new steering arms and track rods (couple of years old but again minimal mileage)
TRANSMISSION AND DRIVETRAIN
318 gearbox
318 diff
325 drive shafts
325 propshaft
WHEELS
Borbets As fitted
It has no MOT and has been off the road for some years - year I did end up getting it MOTd I ended up working the entire summer! it is scabby in places on the sills and bottom of the wings and it does need some mechanical work to finish off as i said its an unfinished project and will be sold as one.
I have boxes of spare parts, a boot lid with spolier and set of side skirts that come in blue and a set of alpina reps that have been refurbished which I will include in the sale.
I am OPEN TO OFFERS but not silly ones - '£500 best price and a packet of crisps'
