|
|
|
Nov 25, 2020 21:50:08 GMT
|
|
i need a abs servo for my smiley transit but trying to find one is hard ,,, what would happen if i fitted a non abs servo i have fitted a new abs master cylinder to it but the servo is hissing every stroke
|
| |
|
|
Rich
Club Retro Rides Member
Posts: 6,234 
Club RR Member Number: 160
|
brake servo Rich
@foxmcintyre
Club Retro Rides Member 160
|
Nov 25, 2020 23:08:55 GMT
|
|
One post would have sufficed for the same question. But anyway. Does it constantly hiss with the pedal depressed or just ‘sigh’ as it’s pushed but not a constant noise? And is the servo assistance actually present?
|
| |
|
|
Dez
Club Retro Rides Member
And I won't sit down. And I won't shut up. And most of all I will not grow up.
Posts: 11,712
Club RR Member Number: 34
|
brake servo Dez
@dez
Club Retro Rides Member 34
|
Nov 25, 2020 23:20:53 GMT
|
|
I don’t see why a servo would be different between abs and non abs models. I don’t ever remember seeing one that was?
|
| |
|
|
|
|
|
|
|
|
I'm watching this for the "sigh" - my TT has always given off a little "sigh" whenever I press the brake pedal, as if it's mildly irritated that I should want it to stop. The brake pedal is fairly firm (and better since I swapped the rear pipes and calipers and bled it) and it only does it when the pedal is pressed.
I also wondered what the difference is between ABS and non-ABS servos, but perhaps the vehicles with ABS have other differences that require different levels of assistance from the servo, so it's a rating thing rather than the servo specifically "knowing" about ABS.
|
| |
|
|
|
|
|
Nov 26, 2020 13:35:44 GMT
|
|
found one now there is a differance so i am told brakes work but the hiss is supposed to stop after one hiss .got new master on too ohh well live and learn its constant his diaphfram as gone
|
| |
|
|
|
|
|
Dec 11, 2020 15:17:32 GMT
|
I don’t see why a servo would be different between abs and non abs models. I don’t ever remember seeing one that was? Only ones i've seen were on Corrados and B3 Passats where they had a switch built into the servo |
| |
Needs a bigger hammer mate.......
|
|
