Had a spot of time off this to make an electric power steering column for a mate. Got back into it last week. I cleaned and painted the brake pedals and mountings and the suspension towers/mount thingys. The suspension mounts were finished in tinted Raptor. The pedal box is a much modified Triumph Herald (the original base for this when it was built way back in the '80's). In the stock setup the pedals are bushed and have a shaft going through that has e-clips on the end. This results in the bush doing nothing and the shaft turning in the mount, both of which then wear. My solution is stainless steel pins with a lock tab. This makes the bush work as it should.
I bolted the pedals in which also involves the master cylinder mount.
Dropped the master cylinders in just to show how it's set up.
One of the suspension mounts.
Once I get the brake m.c's set up I can start to get brake pipes fitted while it's still on the rotisserie. Sorry about all the dust!