|
|
Jun 11, 2018 14:53:30 GMT
|
ooooh yes. I have used those in the past. But not very flexible for tight areas and quite aggressive. What I'd like to see is a wire cup wheel where the strands are held together by weld within the cup, rather than just relying on a crimp. So they wear down rather than fly out. completely agree, although most of them just fatigue and snap due to bending repeatedly.
|
|
|
|
|
|
|
|
I'm sorry Ken... Moss is now removed. So where was I ? Well some might remember ages ago, a long, long time ago when I still had a V6 Viva,that mentioned I was going to sell it and if so I wouldn't mind an Imp project. Well last August hannah and I had gone to the Oldschool Hanmer get together and after the meet we went along to a large collection of classic cars an old boy had been collecting until he died. It was there that I had spotted this wee fella... After lots of in-decisions, plus getting another two Imps since then, this one ended up on the back of a trailer on Saturday morning and did a little trip north... Thanks very much to those involved in making this happen. Thanks to Will for collecting it from the yard, along with many other Imp bits (hopefully he might well yet get into an Imp project one day and when this one is finished he'll get a drive so hopefully he'll see what the fuss is about) Also big thanks to Greg for bringing the Imp up for me. Props to Bart, I think, who spotted one of the strops had broken and saved a potentially nasty incident. So it arrived and I sat inside it, beer warming my belly and pondered what new mess I had acquired... Before the guys went on their way back south, Datsun in tow, they helped me push the Imp up to the Imp 'Lichen removal' area... So it sat as I mixed up some warm water and car shampoo... As I cleaned it up an old rego label appeared dated 1985-1986... It looked a fair bit better with all the Lichen removed. Although no all the rust was better evident .... The inside (great head lining which was one of the reasons I wanted it) was filled with extra interior bits and even included a rats nest too. How lucky. I quite like the dated 'Jazzergetics-fitness the fun way' sticker.... I moved the car inside and started the empty out. Good score on a red and black set of seats and door cards. Great condition. It looks like someone had previously removed the door cards, made new hardboard backs and were obviously intending to fit them into either this Imp or another. I'm happy that they'll get used :-) I think they'll look really good against the black mx5 front seats I have bought for the car. Another good score was this fine example of a '90s kettle... So that evening the Imp sat, all clean and dry, probably wondering what was to become of itself.. I was wondering too. I thought it would be a wise idea to pop it up on the hoist and see what it was like underneath. Turns out its really solid from the front to the back until you get to the rear arches. The outer sills are shot but the inner sills, floor area are great. In fact the outer sills are still intact along the very bottom but would still need replacing. The floors are solid! No rust. The front end is really good too. The worst rust is the entire rear end, from the bottom up to the swage line. The rear seat area is solid but the parcel shelf is even worse than the other one. I have learned from that and if I was to do anything with this shell that will be cut right out first. So there we have it. Another potential shell to be rescued but for now it will be plundered for anything that I might need to complete the other one. Apart from the pedal box having been nicked by someone its complete. I have already removed the following for IMP ONE.. The gearstick and choke lever/cable. The throttle pedal and cable. The hand brake and cables. I'll be taking the headlining at some point, the dash, heater, gauges, wiring, lights. So it'll end up as a stripped out rolling shell. I think between the solid rear end and sills of the race car and the really good front end of this a good shell could be made. But I'll wait until I see what Imp one is like to drive before I make any more decisions on what might happen with this one. i might just stash it away in a friends shed for the future. Or maybe flick everything remaining off for someone else to take on as a project. I shall ponder this in the future. Nothing wrong with having a spare Imp up your sleeve
|
|
Last Edit: Jun 12, 2018 10:24:57 GMT by yoeddynz
|
|
|
|
Jun 12, 2018 12:07:42 GMT
|
these Imp things are going to be breeding soon! watching with interest for further updates!
|
|
|
|
remmoc
Part of things
Posts: 931
|
|
Jun 12, 2018 16:32:01 GMT
|
never seen two coloured interior before , must be an export thing , i like it a lot
|
|
|
|
|
|
Jun 12, 2018 19:35:49 GMT
|
Yeah it's quite cool eh. Will work well with a light blue exterior and the black front seats I think.
|
|
|
|
|
|
Jun 13, 2018 21:43:55 GMT
|
I can't believe how solid that new one looks! Don't expect the reg was ever put on hold was it?
|
|
|
|
|
|
Jun 13, 2018 23:22:55 GMT
|
Sadly not. Yeah it is solid. Just oiled all the seams etc. It's out in the sun warming up. Cut a hole in each sill at the back and released all the dirt build up so itll dry up. Inner sills look great.
Ill keep a look out for some plates and tags that are on hold.
|
|
|
|
speedy88
Club Retro Rides Member
"Nice Cortina mate"
Posts: 2,302
Club RR Member Number: 118
|
|
Jun 14, 2018 10:49:24 GMT
|
Does no rego mean it has to be certified? What does that entail normally, it is a pain in the ass or something worse?
|
|
|
|
Darkspeed
Club Retro Rides Member
Posts: 4,882
Club RR Member Number: 39
|
|
Jun 14, 2018 20:46:00 GMT
|
Well its either embarrassed now its lichen coat has been removed or its blushing from all this manly attention....
|
|
|
|
|
|
|
Does no rego mean it has to be certified? What does that entail normally, it is a pain in the ass or something worse? Rego is like road tax in Britain. If you have your car untaxed and off the road then, just like in Blighty, you have to have it sorn'd (which here in NZ is called putting the 'Rego on hold') If you don't put the rego on hold you'll get a letter or email after one year warning you to do so or pay the rego back up to date. After two years without it being on hold the rego lapses and the car can not be re-reg'd without being 're-vinned' and first going through a more stringent WOF (mot) test..much like any new import has to go through when it first gets rego'd in NZ. The re-vin aspect is the car getting a new VIN number. This test is a tougher thing to pass, depending on how officious your tester is. They can and will be far more picky about any form of rust, brakes, suspension components etc. Seatbelts may often have to be re-new'd or changed to suit newer standards plus depending on the year of your car you may be required to fit a highstop stop light in the rear window. You'll lose the nice old black and silver plates and get ugly modern white plates (like my Viva wagon has because its been re-vinned at some point after its rego must have been allowed to lapse) So in a nut shell... its better to keep the rego on hold, or if buying a car to restore make sure its rego is on hold. It can make or break a car sale, especially if the car has quite a bit of rust. 'Plates and tags' is a term used when locating a Vin number and matching set of license plates that are on hold- then using them on your project to make life easier. Illegal...but hey..its just an old car eh. So I am after a live set of plates and tags for the green Imp now :-)
|
|
|
|
speedy88
Club Retro Rides Member
"Nice Cortina mate"
Posts: 2,302
Club RR Member Number: 118
|
|
|
Thanks for explaining. I'm re-locating to NZ later this year so naturally I'm trying to get my head around all this stuff before I start buying tat
|
|
|
|
|
|
Jun 15, 2018 19:25:19 GMT
|
Hey cool. Welcome to nz (well.. when you get here..) If you've not already joined I must then insist that you check out oldschool.Co.Nz it's just like here but without the swear filters. All great folk with a fair few expats in the mix.
|
|
Last Edit: Jun 15, 2018 19:26:56 GMT by yoeddynz
|
|
CaptainSlog
Part of things
Posts: 510
Club RR Member Number: 180
|
|
|
Speaking of oldschool.Co.Nz, have the foxgloves flowered yet as we are awaiting updates on the Bushblock thread.
|
|
|
|
|
|
Jun 16, 2018 20:33:39 GMT
|
ahhh yes that thread. No foxgloves yet... they are about october/december start. Building another wood shed today- it'll be the third of five. sooooo much pine about!
Will do an update soon but many other things to do :-) Including coming to the UK in July.
|
|
|
|
|
|
Sept 18, 2018 21:08:59 GMT
|
Wow! Its been a while since I've updated this thread. Work on this wee car pretty much ground to a halt after the last update. I got busy with other peoples cars for work and then took off to the UK for a holiday. 4 weeks of sunshine and loads of cycling. Nothing to do with cars at all. The one car that I spotted whilst there and liked was this absolute gem... Drool. Anyway. Got back to NZ and spent the next few weeks dealing to property jobs and more customer jobs. Finally last week I pulled the Imp out from its spot and finished off the panel work in the back. Now there's something we have to go back in time to jog memories. Normally in order to jump time I would just jump into my trusty police phone box like here in the Viva thread.... forum.retro-rides.org/thread/93269/1968-viva-mazda-quadcam-sold?page=49But I have had ongoing issues with that mode of transport. Things like oil leaks from aged seals and fading paint to name a few. So I sold it on at the end of summer to some fella called William who I met at the local market. Strange bloke. Not seen him since. With that machine gone I realised I had a desire to build another. Maybe a Delorian? Nup- prices had gone up beyond what I could afford at the time... so I based my new creation on one of Britains finest machines made. So now folks I shall introduce you to the Princlorian... With my new creation I was able to travel back in time to show you all a period in my Imp resto that I regret wasting time on. So in the beige wonder we shall travel through Hillman Imp time.... Whoops. That's too far. Hang on, try again... Oh dear. Must be the electrics. The fella at the motorist discount centre told me it was a 'new old stock' Lucas flux capacitor! Try again.... Ennnnggggrrrrrr!!!! I flicked the wrong rocker switch. Sorry. Hang on.. Righto this is annoying. But I think I've worked it out. Here we go... FINALLY!!!! Right. So way back when I first got the replacement shell I spent a long long time doing this... To this... I now wish I didn't. Instead I should have just chopped it out. Which is what I did in the end and had mentioned it in one of my last posts. Well with it all gone my next job was to rebuild it all. This is what I did last week. Imp back in its work spot with customers cars waiting... Working on building up ones shelf.... (terrible) To suit the fiberglass engine cover that came with the race car.. Fill in the blanks.. With that finished I rebuilt the rotten gutter above the bay.. Hannah has painted the lot in epoxy primer and I started on the front end which had been bent at some point when the shell was moved- probably a lifting strop or something I guess. I was originally thinking I'd have to cut it out and let in a straight front panel but actually after about an hour with lengths of wood, a jack, hammers of various sizes and many different shaped bits of steel Hannah and I managed to straighten it out fine. Very happy with result. Before... After... Now I need to remove the rot from the front of the bonnet. I carefully hammered out a small dent. Hannah laughed. It could have ended up like this scene... Then I can modify the front end to take the radiator. I must crack on because summer is coming quickly and there's so many other jobs we want to do here ! Planning on selling the housetruck this summer and building a new house trailer so that is one huge amount of time that I'll need to find. Please keep tempting me with racey little Imp photos. Alex
|
|
Last Edit: Sept 18, 2018 21:13:18 GMT by yoeddynz
|
|
|
|
Sept 19, 2018 8:40:24 GMT
|
Hm' Racey little Imp photo's you ask Here you go then this is the Famous Lincoln Imp - it can be found on one of the internal walls of Lincoln Cathedral and was apparently sent by satan but turned into stone by an angel Lincoln City Football Club also use it has there mascot logo Unsure if this is where the car derived it's name from or not but there is a bit more UK history for you - not quite sure that is what you were looking for in your request though
|
|
Last Edit: Sept 19, 2018 20:32:52 GMT by Deleted
|
|
|
|
Sept 19, 2018 20:19:01 GMT
|
Yeah more for just sweet looking low imps. But really...i have actually filled my laptop with images of various Imps. I am quite excited and certainly have my mojo back about this car. It will be much nicer once its in one colour. The colour I am most likely going for is a pastel green that Imps came in. I cant remember the name offhand.. but it looks like this.. However I think it'll have a cream roof.
|
|
|
|
|
|
Sept 19, 2018 21:48:06 GMT
|
Snotgreen ring any bells? Do ypu still have the Triumph wagon?
|
|
Koos
|
|
|
|
Sept 19, 2018 23:00:29 GMT
|
|
|
|
|
|
|
Sept 20, 2018 1:17:00 GMT
|
How lathargic the chases must have been... The robbers in their jags.. Bobby chasing in imp. Giggles from robbers.
|
|
|
|