Making way for my golf GTI to be put in the garage and restored to a road legal standard 
Not my plan for this year as I had hoped to be racing it in some sprints and hillclimbs, but out of the 2 cars I would prefer to keep the golf and make it lovely.
runs very well, pulls well and handles brilliantly.
No MOT/TAX.
Will need welding on the near side inner sill/floor pan (hole approx 2" x 2") and tyres at the very least. May need other work.
Price is £700
Please PM for contact details or pm me yours.
Mostly stripped out and 3 point harnesses fitted, 1 bucket seat and 1 normal seat.
Engine has 52mm TB, adjustable cam pulleys, underdrive pulley.
Samco hose kit fitted
exhaust is 4-1 janspeed with full custom stainless steel to the back. loud but sounds very well.
Front and rear upper braces fitted.
lower 4 point front brace fitted
Koni shocks all round with uprated springs lowering it a few cm.
New black diamond discs and pads all round, rear handbrake could do with being adjusted as it's not the best.
Goodridge hoses all round.
Cobra kevlar bucket seat fitted to drivers side, will come with 3 point harness on both passenger and driver seats, not the 4 point shown in the pictures.
Brand new K&N air filter now also fitted.
Roll cage no longer in, it was very dodgy.
Has had lots of patches welded in and will need a patch on the inner sill passenger side.
Current wheels are speedline 15 x 6.5j fitted with yokohama parada spec 2's. inner edge wear on all tyres
Based in Darwen, Lancashire. not road legal, will need a trailer to take with you.
Swift Gti by keeholden, on Flickr
03.06 (2) by keeholden, on Flickr
DSC_0552 by keeholden, on Flickr
DSC_0626 by keeholden, on Flickr
DSC_0625 by keeholden, on Flickr
DSC_0624 by keeholden, on Flickr
Rolling road video from a long time before I owned it.
[/a]
Not my plan for this year as I had hoped to be racing it in some sprints and hillclimbs, but out of the 2 cars I would prefer to keep the golf and make it lovely.
runs very well, pulls well and handles brilliantly.
No MOT/TAX.
Will need welding on the near side inner sill/floor pan (hole approx 2" x 2") and tyres at the very least. May need other work.
Price is £700
Please PM for contact details or pm me yours.
Mostly stripped out and 3 point harnesses fitted, 1 bucket seat and 1 normal seat.
Engine has 52mm TB, adjustable cam pulleys, underdrive pulley.
Samco hose kit fitted
exhaust is 4-1 janspeed with full custom stainless steel to the back. loud but sounds very well.
Front and rear upper braces fitted.
lower 4 point front brace fitted
Koni shocks all round with uprated springs lowering it a few cm.
New black diamond discs and pads all round, rear handbrake could do with being adjusted as it's not the best.
Goodridge hoses all round.
Cobra kevlar bucket seat fitted to drivers side, will come with 3 point harness on both passenger and driver seats, not the 4 point shown in the pictures.
Brand new K&N air filter now also fitted.
Roll cage no longer in, it was very dodgy.
Has had lots of patches welded in and will need a patch on the inner sill passenger side.
Current wheels are speedline 15 x 6.5j fitted with yokohama parada spec 2's. inner edge wear on all tyres
Based in Darwen, Lancashire. not road legal, will need a trailer to take with you.
Swift Gti by keeholden, on Flickr
03.06 (2) by keeholden, on Flickr
DSC_0552 by keeholden, on Flickr
DSC_0626 by keeholden, on Flickr
DSC_0625 by keeholden, on Flickr
DSC_0624 by keeholden, on Flickr
Rolling road video from a long time before I owned it.
[/a]
