Box-arches, lets see some pictures!

IMO the king of the box-arch;

Of course there's the 900 options.

Box arch = Enduro:





Bubble arch = Artec Design:

Cheers, lots of ideas. Having measured things up, I don't think there's any way the standard arches could be pulled enough to cover going as wide as I'd like to. So it looks like the options are to not go as wide, or do something about the arches.

I think up front I could easily slit along the upper swage line (the line that runs back bellow the window) and it'd look good, but out back I think that lines a little high and would make the car look quite slab sided, this is an initial idea of where to cut:



I think up front it'd look good, even with the standard arches still on there, although I'll have to work out what to do at the bottom of the wing where the body-kit is. I'm not 100% about the rear though, I think it could work, what do you guys think?

Cheers, yeah that'd be exactly the plan. It works out quite well, in that it's parallel to the lower edge of the window and around the same height above the arch as the front flare would be. I'm just worried about making the styling a little messy. I think l'd remove the bump-strip to help with that a little. Have to see how things pan out.

I need to see how low I can go too, I love the look of Scirocco's really low, but I want it to still be fun to drive on the road. There's 95mm ground clearance under the lowest points at the moment, which from past experience I think could come down to around 70 without issue. (Geometry will be corrected appropriately.)

Go Hard or go home !

Boxy



Boxier



Boxiest

Ok so I don't do pictures but have you considered nova arch repair sections or front wings. Natural box, flat lip makes car look lowerand cheap to buy.