HI I have decided to sell my nissan engine conversion. I have spend about a year fitting it it and have driven it for about 6months on weekends.
Ive had no problems at all with it and is very quick.
It comes complete with
Engine,gearbox
New built group4 prop
Radiator and silicine hoses and fan
Exhaust made for mk1 from an ashley
Ecu and wiring (only requires 3 wires connecting)
Starter and alternator
Engine mounts(you will need to make the mounts on chassis)
Standard t2 turbo and blocked blow off valve.
Boost gauge
K@n with all pipes
Full intercooler setup with r5 gt turbo intercooler and all silicone hoses/pipes to mount under inner wing.
Sump with big wing
Fuel pump.
This is a nice conversion with good power at about 150bhp. Boost can now be upped to push around 180bhp-200bhp with timing advance.
I'm only selling this as I'm goi.g to restore the car back to standard.
I would like offers for it all. all rad/piping/pump etc is new and bespoke.
It is for mk1/2 escort but will fit any rwd with adjustments chevette etc.
I have pics and videos that I can send or make for you.
I could be interested in p/x for pinto set up or crossflow setup maybe pinto setup.
Ive had no problems at all with it and is very quick.
It comes complete with
Engine,gearbox
New built group4 prop
Radiator and silicine hoses and fan
Exhaust made for mk1 from an ashley
Ecu and wiring (only requires 3 wires connecting)
Starter and alternator
Engine mounts(you will need to make the mounts on chassis)
Standard t2 turbo and blocked blow off valve.
Boost gauge
K@n with all pipes
Full intercooler setup with r5 gt turbo intercooler and all silicone hoses/pipes to mount under inner wing.
Sump with big wing
Fuel pump.
This is a nice conversion with good power at about 150bhp. Boost can now be upped to push around 180bhp-200bhp with timing advance.
I'm only selling this as I'm goi.g to restore the car back to standard.
I would like offers for it all. all rad/piping/pump etc is new and bespoke.
It is for mk1/2 escort but will fit any rwd with adjustments chevette etc.
I have pics and videos that I can send or make for you.
I could be interested in p/x for pinto set up or crossflow setup maybe pinto setup.
