Welcome Guest. Please Login or Register.

Clicking on eBay [or other affiliations] may result in referral commission being paid if a purchase is made.

banding steels

« Prev
1
Next »

markymarc Part of things Posts: 21	banding steels markymarc @markymarc
	Sept 4, 2011 13:10:43 GMT Select Post Deselect Post Link to Post Back to Top
	Hi there, My little 126 hot rod project needs a boost and I would like to band the 2 rear wheels for a wider look. I will keep the 12" steels as I want moondiscs, so wider at the back (5.5 or 6") Anyone know of a good place to get it done and cost as one quote I have had was £210 for just the 2 wheels!! This seemed alot but would like a second quote, I'm in the essex area if anywheres local to me? Many thanks guys marc


	Reply Quote

composimmonite Posted a lot Posts: 4,681	banding steels composimmonite @composimmonite
	Sept 4, 2011 16:42:22 GMT Select Post Deselect Post Link to Post Back to Top
	What about PCD adapters so you can use ready widened wheels off something else ? Paul H


	Reply Quote

damien4884 Posted a lot Posts: 1,114	banding steels damien4884 @damien4884
	Sept 4, 2011 16:46:44 GMT Select Post Deselect Post Link to Post Back to Top
	jamesp should do them if your not in any hurry, his waiting list is pretty long iirc
	1977 datsun 810 180b estate

	Reply Quote

markymarc Part of things Posts: 21	banding steels markymarc @markymarc
	Sept 4, 2011 17:11:41 GMT Select Post Deselect Post Link to Post Back to Top
	Many thanks guys, not sure about the PCD adapters as will that push the wheels out then have to get the right offsett?! Would rather stick with banding as it works for me and its the look i want. who is jamesp? any other UK companies? cheers marc


	Reply Quote

composimmonite Posted a lot Posts: 4,681	banding steels composimmonite @composimmonite
	Sept 4, 2011 22:53:59 GMT Select Post Deselect Post Link to Post Back to Top
	Sept 4, 2011 17:11:41 GMT markymarc said: Many thanks guys, not sure about the PCD adapters as will that push the wheels out then have to get the right offsett?! Would rather stick with banding as it works for me and its the look I want. who is jamesp? any other UK companies? cheers marc Adapters might not a problem if you use FWD wheels off, say, a Micra (12") Paul H
	Last Edit: Sept 4, 2011 22:54:26 GMT by composimmonite

	Reply Quote

damien4884 Posted a lot Posts: 1,114	banding steels damien4884 @damien4884
	Sept 5, 2011 20:56:47 GMT Select Post Deselect Post Link to Post Back to Top
	retrorides.proboards.com/index.cgi?action=viewprofile&user=jamesp
	1977 datsun 810 180b estate

	Reply Quote

Retro Rides Privacy Statement