|
|
Apr 13, 2024 22:14:06 GMT
|
Thats a question for somewhere like PF Jones that supply a lot of rebuilt/refurbished commonrail injectors, pretty sure they give the injectors a new code.
Not sure why you would need the specific number, as you don't need it, just enter the code off the injector into the ecu with the appropriate diagnostic tool.
|
|
Last Edit: Apr 13, 2024 22:14:52 GMT by welshpug
|
|
|
|
|
Apr 12, 2024 21:00:47 GMT
|
for spraying I'd definitely want the larger bore as its volume you want there not pressure, same with any air tool to be honest, the more air flow they have the better.
|
|
|
|
|
|
Apr 12, 2024 19:25:50 GMT
|
use the 22mm pipe if its rated for the pressure, it'll help with flow.
at work I think its the blue plastic coated aluminium stuff that was fitted by the Compressor engineers, inside the factory is a large bore cast iron ring hanging off the roof joists.
|
|
|
|
|
|
|
silicone no, heat resistant sealant definitely.
|
|
|
|
|
|
Mar 29, 2024 14:30:02 GMT
|
27x 6v nicad batteries must weigh a fair bit and use a lot of space!
|
|
|
|
|
|
Mar 19, 2024 17:09:26 GMT
|
as that has 5 wires you may not need to change the motor at all, but you will need to figure out what the wires are doing and where they go.
|
|
|
|
|
|
Mar 16, 2024 19:25:21 GMT
|
retropower did this.
|
|
|
|
|
|
|
you're probably thinking of Area52, in Bristol.
That community space/bruces tat storage as was is no more as Bruce relocated to the sticks in Wales, but the friendship groups that it built are still going strong.
The space itself taken on by a friend of mine that was a local attending the space at the time, more of a Storage and ramp hire space now.
|
|
|
|
|
|
|
Feb 27, 2024 10:10:43 GMT
|
the VTS is a manual TU5JP4S, the 125 bhp variant, the GT was the odd 110 bhp that could have the automated ma box.
same block and crank as the earlier 106 120 bhp engine, the management system is a step further on from the 106 being fly by wire and two lambda sensors.
there is no vvt, just map and throttle, coolant temp and air temp and crank signal.
|
|
|
|
|
|
Feb 13, 2024 13:32:07 GMT
|
a brief glance at the cross reference list and they were still used on the 2017 fiesta ST!
|
|
|
|
|
|
Feb 13, 2024 13:29:35 GMT
|
|
|
|
|
|
|
Feb 11, 2024 15:35:11 GMT
|
The guy that owns the Bentley blower posted a few years ago recently bought 'the beast' and Jonny smith paid him a visit for a carcave episode.
|
|
|
|
|
|
|
|
first step is to find your mapper, then ask them what their preferred ecu is that will work your engine and budget.
no point saving a few hundred on something home built if nobody will map it.
|
|
|
|
|
|
Jan 17, 2024 17:13:00 GMT
|
reg check says its taxed and mot'd, 3000cc, and last V5 10th of june 2023.
|
|
Last Edit: Jan 17, 2024 17:13:49 GMT by welshpug
|
|
|
|
Jan 16, 2024 17:37:36 GMT
|
advert states monza 3.0 with a manta 5 speed box
|
|
|
|
|
|
Jan 16, 2024 17:32:49 GMT
|
had this problem with an early Pre defender 110, baffled us for months, only happens because you get voltage feeding back through the lamp to the other wise of the relay for some reason due to the particularly low current draw of LED's.
you need to wire up individual telltales for left and right, or not have one.
|
|
|
|
|
|
Dec 29, 2023 10:14:05 GMT
|
I guess they mean M4, Magor, given M40 doesn't go into wales.
|
|
|
|
|
|
Dec 26, 2023 20:57:40 GMT
|
I've also used MrInjector, no issues, a while back so I don't recall the exact timescale but recollect it was relatively prompt and reasonably priced.
|
|
|
|