|
|
|
Jun 12, 2019 21:34:34 GMT
|
|
What would anybody recommend to cover aluminium to stop corrosion. Have some bare panels I would like to preserve. Can only think of wipe with an oily rag, must be a better option?
|
| |
|
|
tristanh
Part of things
Routinely bewildered
Posts: 990 
|
|
Jun 12, 2019 23:08:55 GMT
|
|
ACF-50.
|
| |
Whether you believe you can, or you cannot, you're probably right.
|
|
|
|
|
|
|
What would anybody recommend to cover aluminium to stop corrosion. Have some bare panels I would like to preserve. Can only think of wipe with an oily rag, must be a better option? The nicest way would be to have the aluminium parts anodised. Either clear or a colour of your choice. |
| |
|
|
|
|
|
|
|
Jun 15, 2019 16:52:47 GMT
|
Thanks for the replies. Have the two larger panels made, which showed up an unexpected problem. At least one will not go in without bending to get past all the tube work. So that makes it a no for lacquer and anodising. Not too far off fitting them so the answer will be in the build thread.  |
| |
|
|
