|
|
|
Aug 12, 2017 21:08:08 GMT
|
|
Has anyone fitted a motorcycle tachometer in their project? I just like the look of some of them, and it would be something different.
I'm running a 4age with an emerald ecu.
Many thanks
|
| |
|
|
v8ian
Posted a lot
Posts: 3,757
|
|
Aug 13, 2017 11:49:24 GMT
|
|
Thats an interesting thought, I thought about using a cable bike tach on my 4age, but in my wisdom I have deleted the dissy, and used the 2 bolt holes to mount my alternator, I don't see any reason why you cant run a 4 cylinder off the Yellow? tach drive wire from the emerald, Got any Pics???
|
| |
Atmo V8 Power . No slicks , No gas + No bits missing . Doing it in style.
Austin A35van, very different------- but still doing it in style, going to be a funmoble
|
|
|
|
|
Aug 18, 2017 16:52:03 GMT
|
|
I haven't got any photos, just an idea at this stage. I've just emailed emerald to ask the question
|
| |
|
|
|
|
|
Aug 21, 2017 12:50:41 GMT
|
|
From Emerald:
The Emerald outputs a 12 volt square wave signal so if that is what you have on your bike tacho it will work. If the bike has a different number of cylinders you can tune the output signal but only on the K3 and K6 ECUs, not the older M3Dk
|
| |
|
|
