mr
Posted a lot
Posts: 1,526
|
|
|
|
|
anyone got a body tub or bulkhead laying around? doesn't have to be mint or new,just good enough to be usable and not full of holes. cheap too.
can collect from se London and north kent
Needs to have good seat runner mount areas .minor repairs not an issue
|
| |
Last Edit: Oct 19, 2017 7:57:37 GMT by mr
Got the car from 105 bhp at the crank to 152 at the wheels.nitrous going on next.....if it ain't broke,keep bolting on go faster parts until it is........ www.fordgranadaclubuk.freefo.de |
|
mr
Posted a lot
Posts: 1,526
|
|
|
|
|
bump
|
| |
Got the car from 105 bhp at the crank to 152 at the wheels.nitrous going on next.....if it ain't broke,keep bolting on go faster parts until it is........ www.fordgranadaclubuk.freefo.de |
|
mr
Posted a lot
Posts: 1,526
|
|
|
|
|
spitfire/herald floor pans may be suitable too...............
bump
|
| |
Got the car from 105 bhp at the crank to 152 at the wheels.nitrous going on next.....if it ain't broke,keep bolting on go faster parts until it is........ www.fordgranadaclubuk.freefo.de |
|
mr
Posted a lot
Posts: 1,526
|
|
Jun 19, 2017 20:23:05 GMT
|
|
Bump
|
| |
Got the car from 105 bhp at the crank to 152 at the wheels.nitrous going on next.....if it ain't broke,keep bolting on go faster parts until it is........ www.fordgranadaclubuk.freefo.de |
|
mr
Posted a lot
Posts: 1,526
|
|
Sept 13, 2017 4:26:25 GMT
|
|
Still looking.someones gotta have a body tub in the garden or garage.just need the complete floor cut out at the very edges.happy t have it in 4 pieces if ness.realy needs to be a vitesse or herapd apparently a and spitfires are different??
|
| |
Got the car from 105 bhp at the crank to 152 at the wheels.nitrous going on next.....if it ain't broke,keep bolting on go faster parts until it is........ www.fordgranadaclubuk.freefo.de |
|
mr
Posted a lot
Posts: 1,526
|
|
|
|
|
still after front floor and bulkhead section for a herald/vitesse.literally just the floors and the bulkhead panel,i don't need the dash-screen etc. also need the floor section from the rear tub but only to where it meets the sides of the body. I need the floor to mate a vitesse chassis to a morris 8 body shell
|
| |
Got the car from 105 bhp at the crank to 152 at the wheels.nitrous going on next.....if it ain't broke,keep bolting on go faster parts until it is........ www.fordgranadaclubuk.freefo.de |
|
mr
Posted a lot
Posts: 1,526
|
|
|
|
|
NO LONGER NEEDED,FLOOR NOW SOURCED!!
|
| |
Got the car from 105 bhp at the crank to 152 at the wheels.nitrous going on next.....if it ain't broke,keep bolting on go faster parts until it is........ www.fordgranadaclubuk.freefo.de |
|
mr
Posted a lot
Posts: 1,526
|
|
|
|
|
let down, still need floor pan for a vitesse/herald. don't need the body tub,just the front pans and bulkhead panels and the rear floor. I don't need the bpost etc,just the floor itself. happy to take in 4 pieces
|
| |
Got the car from 105 bhp at the crank to 152 at the wheels.nitrous going on next.....if it ain't broke,keep bolting on go faster parts until it is........ www.fordgranadaclubuk.freefo.de |
|
