How to get rid of a Mini:

The rear end and subframe mounts had gone and it had a lot of odd bits welded in to the inner / outer sills.
The B and C posts were rotten as were both ends of the bulkhead.
There wasn't a lot of metal left in the rear bins
The shell was slightly bent as well after a front end smash.
The A-panels and wings were full of filler
Both doors had gone, as had the rear vallance....... need I go on?

All the good bits were kept and are slowly being added to a new project that's sat in my other garage.

It only took a day to cut up! The local tip were getting a little upset by the third trip...........!