stevietuck
Posted a lot
Never argue with idiots,they drag you down to their level then beat you with their expertise!
Posts: 1,348
|
|
|
|
|
Ah right, sounds like a good idea. Good on ya.
|
| |
|
|
|
|
|
Mar 19, 2016 16:26:09 GMT
|
Have had a good day on the latest Largo today. Refreshed the headlights as they were very yellow! Removed the dodgy graphics on the bonnet and the drivers side and machine polished it. Needs a good wax once the passenger side graphics have been dealt with. Have decided on a grey rear corner unit for this one. The unit will be placed a little further back with a more central hob/sink and there will be a step out at the bottom to complete the bed making it a small double or a large single. Hope to have this one complete by the end of the week. Cheers   |
| |
|
|
|
|
|
|
|
Have just about finished this one. A bit of wiring to do for the water pump and the graphics to remove from the passenger side. Have redesigned the unit to make it possible to swivel the rear seat and also make it cheaper to make. A few tweaks and I have taken £25 of cost out of the unit. As they say "every little helps" Cheers mike    |
| |
|
|
stevietuck
Posted a lot
Never argue with idiots,they drag you down to their level then beat you with their expertise!
Posts: 1,348
|
|
|
|
|
Looks spot on mate, very pro looking.
|
| |
|
|
|
|
|
|
|
|
Thanks
got another one to pick up next week. I have all the templates now for the units so can turn one around in 2 days.
Just started designing a 2 birth conversion for a Ford Transit Connect as Largos aren't that easy to find although they do sell well.
Cheers - mike
|
| |
|
|
|
|
|
Oct 20, 2016 18:20:53 GMT
|
Finished removing the graphics from the drivers side this morning, just needs a machine polish now, gave all the seats a good clean and sorted a few odds and sods out. Have now removed the nearside rear set,seat belt and trim. Spent an hour making the templates for the kitchen unit, they are made from 3mm ply and will be used for making out the 9mm ply that the finished unit will be made from. Have now got most of the bits I need to finish the project, just need to pick up 2 sheets of laminate for the unit. cheers - mike     |
| |
|
|
|
|
|
|
|
Thanks got another one to pick up next week. I have all the templates now for the units so can turn one around in 2 days. Just started designing a 2 birth conversion for a Ford Transit Connect as Largos aren't that easy to find although they do sell well. Cheers - mike This is amazing work, reliantscimitar. A Nissan Largo is one of the vehicle types I'm looking at purchasing for exactly this reason. A family getaway car with camper/touring potential for either short breaks or longer stays with an added awning (but one I can still do the weekly shop & commute in). Have you done any more Largos since this post last year?
hermitsrest
|
| |
|
|
|
|
|
|
|
|
Hi there
I did another largo after this one but with a drivers side conversion.
I don't come across many largo's now.
I am currently doing a Renault Traffic which you can see if you look up my other threads.
Cheers - mike
|
| |
|
|
|
|
|
Jul 26, 2018 19:47:27 GMT
|
|
Hi , i own a Largo and i,m looking for the rear seats any ideas
|
| |
|
|
|
|
|
Jul 26, 2018 19:50:53 GMT
|
|
Hi , i own a Largo and i,m looking for the rear seats , any ideas
|
| |
|
|
|
|
|
Jul 26, 2018 21:13:41 GMT
|
|
hi there
I have not done a Largo for quite a while now but there is a Largo forum with a few people usually breaking them.
Cheers - mike
|
| |
|
|
