1950CC Block with lotus twincam pistons, dyno print out showing 120hp
Piper 270 Cam
Lightened flywheel
Ap clutch
Big valve head, with 3 angle valve seats (allegedly gas flowed)
Bronze valve guides
Peco 3 piece exhaust system
Distributer modified by Aldon Automotives
Lowered by 1" inch all round
Black vinyl Bucket seats, mountney steering wheel and loads of little chrome bits and bobs
Gas struts on boot
all this is under 5000 miles old
Will be MOT'd for around 10 months.
Paint work is the major let down of the car, its pretty bad on the bonnet and its cracked around the windscreen. Everything works fine and there is a folding bulging with history.
Could someone also value some spare bits:
Aluminium bonnet
Spax suspension (new)
ST front valance (new)
Sebring rear bumper (new)
Piper 270 Cam
Lightened flywheel
Ap clutch
Big valve head, with 3 angle valve seats (allegedly gas flowed)
Bronze valve guides
Peco 3 piece exhaust system
Distributer modified by Aldon Automotives
Lowered by 1" inch all round
Black vinyl Bucket seats, mountney steering wheel and loads of little chrome bits and bobs
Gas struts on boot
all this is under 5000 miles old
Will be MOT'd for around 10 months.
Paint work is the major let down of the car, its pretty bad on the bonnet and its cracked around the windscreen. Everything works fine and there is a folding bulging with history.
Could someone also value some spare bits:
Aluminium bonnet
Spax suspension (new)
ST front valance (new)
Sebring rear bumper (new)
